Fusion 3D Water Resistant
Fusion 3D Water Resistant
SKU: FD8806
Thickness
12mm
Select Colour
10 optionsFusion 3D Water Resistant flooring collection from floortex.
Fusion 3D Water Resistant is the Floortex laminate to look at when the room sees water. The name is the specification: this is a 12mm laminate built to cope better with the everyday spill that gets wiped up reasonably soon, which is the weak point of ordinary laminate.
It comes in 10 colours on an 1800mm board, and carries the same AC4 durability rating as the thicker-feeling Pinaco — AC4 is specified for heavy domestic traffic and light commercial use. The 1800mm length is the other half of what you are buying: longer boards mean fewer end joints across a floor, which makes a room read as larger and calmer.
Which rooms it suits
This is the laminate for Melbourne kitchens, for the stretch between a kitchen and a dining area, and for entries where wet shoes come in off the street. It also suits a laundry better than ordinary laminate does. Read the water-resistance detail on this page, because "water resistant" is not one standard that means the same thing for every brand, and the manufacturer's own wording is the version that matters.
What it is still not is a bathroom floor. Water resistance helps with spills; it is not the same as a floor built for standing water. If the room has a shower in it, look at hybrid instead.
The 10 colours
The range is built around Australian timber looks, which is unusual for a water-resistant laminate: Sydney Blue Gum, Qld Spotted Gum, NSW Spotted Gum, Tas Oak and Blackbutt all appear by name. Alongside them sit Lava Grey, Pearl Grey, Casper, Latte and Provincial for rooms where a grey or neutral floor works better than a timber tone. In a Melbourne kitchen the greys hide dust and crumbs between sweeps better than a mid-brown does.
Why the board length matters here
At 1800mm these boards are noticeably longer than the 1200mm Pinaco, and in a kitchen or an open-plan space that difference is visible rather than technical. Fewer end joints means the eye reads the floor as one surface instead of a grid, and in a narrow Melbourne galley kitchen that is the difference between the room looking longer or looking busier.
The trade-off is cutting. A long board in a small or broken-up room produces more offcuts, so a laundry or a small bathroom-adjacent hallway may waste more material than it would with a shorter board. If your job is mostly small rooms, ask us to compare the two before you order.
How it compares to the other Floortex laminates
Pinaco 12mm is the same thickness and has more colours, but it is the choice when underfoot feel matters more than water. Arborlok 2250 has the longest board in the range at 2200mm, despite the 2250 in its name. Australian Species is the smallest and most focused set.
The simplest way to choose: if the room sees water, start here. If it does not, start with Pinaco. Our Floortex range guide sets out all seven ranges side by side.
What installation involves
Fusion 3D is a floating floor, clicked together over an underlay rather than glued down, so in most Melbourne homes it can be laid over an existing hard surface without lifting it first. A floating floor needs an expansion gap at the walls, finished with skirting or a bead.
In a kitchen there is one extra thing to settle early: how the floor meets the cabinetry. A floating floor should not be trapped under a fixed kickboard, because it needs room to move with the seasons. It is a five-minute conversation with your installer and an expensive thing to discover afterwards.
Seeing it in person
Bring the room to us rather than guessing from a screen. We have the range at our Docklands showroom, where you can put a Fusion 3D board next to a hybrid and see what the difference actually looks like in your colour. A photo of the room and a sample of the benchtop or skirting it sits beside will narrow the choice in minutes.
Fusion 3D Water Resistant
Lava Grey